Fender flares - removal and fitting - Alfa Romeo Stelvio Forum
 1Likes
  • 1 Post By NYCSTELVIO
 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 11-14-2018, 09:18 AM Thread Starter
Junior Member
 
Join Date: Nov 2018
Location: Oslo
Posts: 1
Fender flares - removal and fitting

Hi,

The fender trim/flares on my Stelvio has come partially loose a couple of places. More specifically front drivers side at the bottom and rear passager side. Probably due to a garage not fitting them back propertly after rustproofing the car.

Does anyone here have some tips/guide to how remove and refit them safely?

Best regards

Juan
Juan Høiaasen is offline  
post #2 of 8 (permalink) Old 11-14-2018, 09:38 AM
Senior Member
 
SEARCH's Avatar
 
Join Date: Oct 2018
Location: Austin, TX
Posts: 105
Following this, was just about to post a similar thread - I need to remove my stock fender flares and fit my new QV flares on.
SEARCH is offline  
post #3 of 8 (permalink) Old 03-27-2019, 01:29 PM
Member
 
RAO-3's Avatar
 
Join Date: Apr 2018
Location: North Carolina
Posts: 73
Did anyone ever figure out how to remove the stock flares? Any parts needed to install the new flares?
RAO-3 is online now  
post #4 of 8 (permalink) Old 03-27-2019, 03:58 PM
Senior Member
 
NYCSTELVIO's Avatar
 
Join Date: Jun 2018
Location: Upper East Side, NYC
Posts: 181
The stock flares just pull right out.

Took me less than 5 minutes per corner to remove when I installed the QV flares..

2018 Stelvio Sport AWD
Vesuvio/Red
EuroCompulsion V2 Intake,Red Start/Stop Button, Gunmetal Powedercoated Wheels, 20% tints all around, Debadged, Carbon Interior Bits, Stelvio Quadrofoglio Fender Flares, Farad Slim Door visors, Carbon front V grill, Center Muffler Resonator delete, EMC Pro Piggyback
NYCSTELVIO is online now  
post #5 of 8 (permalink) Old 03-27-2019, 04:19 PM
Member
 
RAO-3's Avatar
 
Join Date: Apr 2018
Location: North Carolina
Posts: 73
Quote:
Originally Posted by NYCSTELVIO View Post
The stock flares just pull right out.

Took me less than 5 minutes per corner to remove when I installed the QV flares..
How are they held on? Some sort of clip I would guess? Do you have part number by any chance?

TIA
RAO-3 is online now  
post #6 of 8 (permalink) Old 03-27-2019, 04:32 PM
Senior Member
 
NYCSTELVIO's Avatar
 
Join Date: Jun 2018
Location: Upper East Side, NYC
Posts: 181
Quote:
Originally Posted by RAO-3 View Post
How are they held on? Some sort of clip I would guess? Do you have part number by any chance?

TIA
Yes they are held on by clips and the replacement flares come with new clips.

Search under my username for part numbers as I posted them in the past.
RAO-3 likes this.

2018 Stelvio Sport AWD
Vesuvio/Red
EuroCompulsion V2 Intake,Red Start/Stop Button, Gunmetal Powedercoated Wheels, 20% tints all around, Debadged, Carbon Interior Bits, Stelvio Quadrofoglio Fender Flares, Farad Slim Door visors, Carbon front V grill, Center Muffler Resonator delete, EMC Pro Piggyback
NYCSTELVIO is online now  
post #7 of 8 (permalink) Old 03-27-2019, 04:34 PM
Member
 
RAO-3's Avatar
 
Join Date: Apr 2018
Location: North Carolina
Posts: 73
Quote:
Originally Posted by NYCSTELVIO View Post
Yes they are held on by clips and the replacement flares come with new clips.

Search under my username for part numbers as I posted them in the past.
Thanks!
RAO-3 is online now  
post #8 of 8 (permalink) Old 03-27-2019, 05:03 PM
Senior Member
 
Join Date: Oct 2017
Posts: 493
pictures of before and after PLEASE!
Marco is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome