Hey guys/gals,new here. I recently purchased a 2018 Stelvio Ti sport and was wanting to add a powered sub to enhance the base stereo system. I joined this forum hoping that I could find where someone has already gone through the process & as well had best place to tap/wire color details. Unfortunately I found nothing. So I have got the installation complete and thought I’d share my process & hope it will help someone else in need. I first started with tapping the rear door speakers, very easy to hide the wire and keep it clean. Tap each side L- orange/orange-blk stripe twisted together,,,R-green/green blk stripe,, picture includes of where I tapped to keep it clean. Returned first sub, thought it was blown till I got a second and had same problem, sounded blown and would cut out on protect mode. Do yourself a favor and purchase a LOC converter, it worked great after installing this product. It’s almost as the rear styrofoam area was meant for this sub, fit beautiful with a few modifications (drill holes for wires). While I had rear left panel off tapping remote turn on wire to 12v plug I noticed there is a spot for 3.5” speakers, so ran wire for those and have Rockford Fosgate on order. I also hooked up some basic tweeters inside that panel for a bit extra from rear. I may have left something out but hope the pictures or the proper colored wires will help someone in there attempt. Good luck
Troy810washere
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
